The refining industry has undergone many changes, from the methods of processing to the length of time that they operate their process units. These changes, along with the emergence of low sulfur fuel specifications, the requirement to process lower grade crude and the need to convert more bottom-of-the-barrel residuals, has put an extreme demand on isolation and control valves. Unreliable and unpredictable valves in emergency situations can cause enormous monetary losses and have devastating consequences for personnel. THINKTANK has responded to these challenges by developing a combination of diverse trim configurations and high quality coatings for use in high temperature, high pressure, erosive, corrosive, viscous and coking/asphaltene applications.
Reference List
The information of end-user:
Yulin Oil Refinery is located in the eastern suburbs of Jingbian County, Shaanxi Province, and was founded in 1993. In the initial stage of plant construction, the plant’s scale is only 150,000 tons/year of crude oil processing capacity and 70,000 tons/year of secondary processing capacity. Through more than ten years of development, the current installation’s primary crude oil processing capacity is 2 million tons/year, and the secondary processing capacity is 800,000 tons/year.
Problem:
Yulin Oil Refinery mainly processes crude oil in the Yulin area. It is estimated that the crude oil output in 2014 will be close to 5 million tons/year, which exceeds the refinery’s processing capacity. Therefore, the entire 5 million tons/year crude oil processing and supporting system transformation must be implemented as soon as possible to meet the rising demand for crude oil production in the Yulin area. And to cooperate with the country’s gasoline and diesel product upgrades, a 20,000Nm3/h hydrogen production device was designed in a combined device of 900,000 tons of gasoline and 2 million tons of diesel to ensure gasoline and diesel indicators meet the national level IV standards.
Design:
The design of the hydrogen production unit in the combined plant. This hydrogen production unit is designed for a reformed gas hydrogen extraction unit with 13000Nm3/h qualified hydrogen, with a design load of 60%~110%, and a conversion hydrogen production unit with a scale of 20000Nm3/h qualified hydrogen with a design load of 40%~110%.
Solution:
THINKTANK has provided 92 control valves for this device, used for raw gas pretreatment, conversion and medium temperature conversion, medium variable gas heat exchange and cooling, acid water recovery system, and PSA hydrogen purification unit. The products range includes globe type control valves, ball valves, high-performance butterfly valves, gate valves, etc.
As an engineering team at THINKTANK, we recently completed a custom order for eight large-diameter swing type quick acting line blind valves, all made from 316L stainless steel, sized DN800 (32”), DN1200 (48”), DN1300 (52”), and DN1400 (58”). These valves are now ready for shipment to a major steel plant
THINKTANK is proud to announce the successful delivery and commissioning of a DN2200 electric actuated hemispherical valve for a major hydraulic infrastructure project. The valve has been installed and is now operating smoothly on site. This milestone demonstrates THINKTANK’s capabilities in large-diameter valve design, precision manufacturing, and integrated electric actuation
At THINKTANK, we often get asked by project engineers and system designers: “Can Pressure Seal Bonnet technology be applied to control valves for high-pressure conditions?” It’s a valid question—especially when you’re working with high-temperature steam or critical hydrocarbon services. Over the past 30 years in valve manufacturing, we’ve worked with
If you’re sourcing knife gate valves for tough conditions—whether it’s slurry lines, chemical tanks, or wastewater systems—you know not all valves perform the same. At THINKTANK, we don’t just sell valves. We manufacture and ship them daily, built to spec, tested in-house, and ready for real-world applications. Below is a
In recent years, we’ve worked closely with manufacturers of wedge gate valves, slab gate valves, knife gate valves, globe valves, and rising stem plug valves. One recurring request stood out: “Can you provide a reliable pneumatic linear actuator that fits our custom valve dimensions, with enough thrust and flexible control
An Engineering Selection Guide for Compressor Protection Systems Applicable to: Natural Gas Compressor Stations / Gas Pipeline Networks / Chemical Plant Compressors / LNG Plants / FCC Units Introduction For design institute engineers, EPC project engineers, plant equipment procurement managers, and compressor OEM engineers, anti-surge valves are a vital control
Avoid your inquiry is delay response, please enter your WhatsApp/Wechat/Skype along with the message, so we can contact you at the very first time.
We will reply you within 24 hours. If for urgent case, please add WhatsApp: +86 185 1656 9221, or WeChat: +86 199 2125 0077. or call +86 189 5813 8289 directly.
We will reply you within 24 hours. If for urgent case, please add WhatsApp: +86 199 2125 0077, or WeChat: +86 199 2125 0077. Or call +86 189 5813 8289 directly.
