*THINKTANK takes your privacy very seriously. All information is only used for technical and commercial communication and will not be disclosed to third parties.
Solenoid valves are often used in applications where a control valve is required to be actuated quickly to a fault position under certain conditions. It is generally designed to be in the air supply line and is an important accessory to the air control system.
The fusing link valve for the diesel generator set includes the valve body and actuator, and the valve body and actuator are fixed by a fixed bracket/yoke. The actuator of the fused valve includes the shaft, fusible link, manual/gear operator, actuator protection cover, limit switch, etc.
The sluice gate valves are real end-of-line valves designed to hold back water with minimal leakage in applications such as drains, sump tanks, and distribution boxes.
Condensate has a large amount of heat, generally accounting for about 20-30% of the total heat of steam, and for some equipment, it can be as high as 40%. Therefore, if high-temperature condensate can be recycled as boiler make-up water or used for secondary flash steam, it not only saves industrial water but also saves a large amount of fuel.
Water mixing is the mixing of water at different temperatures, and the resulting mixing temperature varies at different hot and cold flows
Knife gate valves are primarily made for isolation and on-off services in systems with high suspended particle contents. Knife gate valves are particularly useful for managing viscous, corrosive, and abrasive media in addition to the slurry.
A good partner is a lasting and effective investment
Just leave your name, email, and simple message or requirements, We will contact you within 1 hour.
WhatsApp: +86 185 1656 9221
Skype ID: sowell85
Wechat ID: +86 189 5813 8289