Pipe Schedule Chart 101
The pipe Schedule specifies the tube wall thickness. As the number of pipe schedules rises, so does the thickness of the pipes. The primary role of pipes is to transport process media, such as gas, air, slurry, steam, liquid or mixed medium, etc. under internal pressure, external pressure, or both.
Pinch Valves Manufacturer
Pinch Valves are suitable for isolating and controlling abrasive, corrosive, and fibrous materials. The pinch valve is increasingly being utilized as an isolating valve or modulating valve for powder, sludges, dust, emulsions, gaseous materials, granulates, pellets, compressed air, and other similar materials.
Válvulas 101
Una válvula puede definirse como un dispositivo mecánico que sirve para abrir, cerrar o controlar la capacidad de flujo de líquidos o gases mediante una pieza móvil. Las válvulas son uno de los instrumentos de control más esenciales en la industria.
Steam Traps 101
a trap is an automatic valve that automatically drains condensate from steam to the outside of the valve body while maintaining tight contact with live steam, if necessary, allowing steam to flow at a controlled or adjusted rate.
Automatic Control Valve White Paper
An automatic control valve is also known as a hydraulic control valve, which is a valve that uses the pressure of water in the pipe network to control the opening and closing and adjust the opening of the valve.
The Best Blowdown Valve Supplier
Blowdown valves are used either continuously or intermittently depending on the service requirements and play an important role in fossil fuel boilers to remove dissolved solids from the boiler water.
tipos de válvulas de control
Sabemos que las válvulas de control son como el “elemento final de control” en el proceso de la industria. La función principal de la válvula de control es regular la capacidad de flujo o la presión aguas abajo de un fluido. Las válvulas de control suelen instalarse con un actuador, un posicionador, un volante, una electroválvula, un final de carrera u otros accesorios.
Control Valve Failure Position 101
An important design parameter for control valves is the position to which the valve will “fail” if power or signal is lost. There are many types of failure position designs in industrial process control, and this article analyzes the 6 main failure positions.
Saturated Water VS Saturated Steam
We called the water that has reached saturation temperature saturated water. When continuing to heat the water but the temperature remains the same, it produces vapor with water called wet saturated steam, until all the water becomes steam, it is called dry saturated steam or called saturated steam.
The Ultimate Guide to Electric Actuator for Valves
Any type of electric actuator is a device that uses power to drive a valve. This device assembly with a hand operator to open or close the valve, or an intelligent electronic component with sophisticated control and measurement devices to control the valve continuously working.
The Ultimate Valve Cv Sheets
Valve Cv applies to the coefficient of pressure drop(ΔP) or head drop (Δh) on the valve of Q(flow capacity). This article will tell you everything about the valve cv.
Globe Valve VS Gate Valve
This article is to introduce the difference between globe valves and gate valves.
